LDR Kit build video

Hi folks check out my latest video on YouTube here

hope you enjoy it

Signalex Powerbank Teardown

Hi Folks today I am going to share a quick teardown of a Sgnalex Powerbank I got from Poundland yesterday.

As you can see from the above picture the powerbank has a small size of 98 X 25 X23 mm which made me wonder what it was like inside.

 so using my spudger I gently popped the back off to reveal a small circuit board and cell

the cell is a 18650li-ion 3.7v 1200mha which is a very good cell and makes me think about buying more of these just for the cells.

 voltage on the battery

 here is the charging and boost circuit and the main chip seems to be a MP3401A (data sheet ) which is a P-channel mosfet it does its job and considering this is only £1 its not bad value

to close the model no of the powerbank is 170327 I have used one of these for a while now on my prototyping board as a steady source of power for my projects 

thanks for reading 

Eyepiece light project Part 4 making things smiple

Hi Folks welcome to Part 4 of the eyepiece light project in this part we will talk about a change to the chip and the power supply for the project .

 I've decided to change to the sn74hc595 chip an I can run it without a mico controller and for this project I think it will make it easier to prototype. I have the chip set up with power and ground on pins 16 and 8 I also have a 1000k resistor on pin 13 with is the output enable pin and then I have leds attached to 4 of the outputs.

you can find the data sheet here

as for the power supply for the project I'm using 2 of these button cell batteries giving me 6 volts  in total which gives me plenty power .

here you can see the very simple breadboard layout

here is the project working its pretty bright but I am going to add some low value resistors to help the the leds last longer and run slightly less bright but I will left you know what value I choose after some testing .

thanks for reading 

Upcoming videos update

Hi Folks

Today I'd like to share news upcoming videos  that I plan to make over next few weeks I have a few kits that you can see below I'm not sure which one I will do first but I should have the first one up by the weekend I will also be record the proto version of the eyepiece light project as well and some other little things as well .

Tomorrow I will have and update on a eyepiece project don't forget the check out my last video Here 

thanks for reading